Broilmaster Grill Parts
Gas Grill Parts from BBQParts.com


 
Parts
Grill Body #3
Price
Burner Alternatives. There are burner choices for Grill Body #3 depending if the burner controls are on the post of the grill or are on the upfront control panel or shelf. POST control burners have two venturi tubes going straight down the post of the grill. UPFRONT control burners have two venturi tubes that curve to the front of the grill. After you determine POST or UPFRONT style, you will need to select either the Stainless Steel Bow Tie Burner or the Cast Iron Bow Tie Burner depending on your own preference. The next four entries describe the choices.
Stainless Steel Bow Tie Burner
P/N DPP-5
Sorry, we do not stock or sell this burner, Try broilmaster.com.
Stainless Steel Bow Tie Burner For Dual Control Model. Two Curved Venturi Tubes go from Burner and curve upfront to control valves on front control panel. Comes with Burner, Twin Curved Venturis, Gasket and Screws. Burner Dimensions: 21 inches wide by 10 1/2 inches deep.
The DPP-5 fits models P3, DU, D3, U3, S3. (69)
Cast Iron Bow Tie Burner
P/N WDLB-DV8
in-stock
Cast Iron Bow Tie Burner For Dual Control Model. Two Curved Venturi Tubes go from Burner and curve upfront to control valves on front control panel. Comes with Burner, Twin Curved Venturis, Gasket and Screws. Burner Dimensions: 21 inches wide by 10 1/2 inches deep. This cast iron burner is a replacement burner for Broilmaster grills that had cast iron bow tie burners as original equipment. This cast iron burner should not be ordered or used in Broilmaster gas grills that had original equipment stainless steel burners. $75.00
Each
Quantity:
Stainless Steel Burner
P/N DPP-4
The stainless steel bow-tie burner for post controls, DPP4, has been discontinued by Broilmaster. We are sold out and cannot supply. For a replacement burner, order the cast iron bow tie burner with straight venturi tubes in this parts list.
Stainless Steel Bow Tie Burner for Dual Control Model with Two Straight Venturi tubes that go straight down from the burner to the Control Valves in the Post. Comes with Burner, Twin Straight Venturis, Gasket and Screws. Burner Dimensions: 21 inches wide by 10 1/2 inches deep.
Cast Iron Bow Tie Burner
P/N WDLB-DV7
in-stock
Cast Iron Bow Tie Burner For Dual Control Model. Two Straight Venturi Tubes go straight down from burner to Control Valves in Post. Comes with Burner, Twin Straight Venturis, Gasket and Screws. Burner Dimensions: 21 inches wide by 10 1/2 inches deep. This cast iron burner is a replacement burner for Broilmaster grills that had cast iron bow tie burners as original equipment. This cast iron burner should not be ordered or used in Broilmaster gas grills that had original equipment stainless steel burners. $75.00
Each
Quantity:
Radiation Shield
P/N RSGSTAINLESS
in-stock
This radiation shield is newly offered and is made of stainless steel. This stainless steel radiation shield measures 8 inches by 16 3/4 inches. It is placed in the burner compartment of the grill between the burner and the bottom casting. Made of Stainless Steel. (MHP) $17.45
Each
Quantity:
Cook Grid Alternatives. You have two choices for cook grid sets for the 3 grill body: the more expensive factory set of 3 porcelain coated, cast iron cook grids or the alternative set of 3 porcelain coated wire cook grids. Your two choices are described below.
Cast Iron Cook Grid Set
P/N DPP-11
Sorry, we no longer stock or sell the cast iron cook grid set for this Broilmaster grill. Nor do we sell the cast stainless set that Broilmaster has offered. Try Broilmaster.com if you are trying to find the heavy duty replacement cook grid set.
The set of three cast iron replacement cook grids we sell for this model are the same the early factory equipment of 10 or 20 years ago for Grill Body 3 series - meaning they have a porcelain enamel coating They are made of heavy cast iron, 3 pieces, with the L-shape design so they can be moved for height adjustment. We believe Broilmaster's current offering is a black matte finish. Ours are not a black matte finish. This set of 3 cook grids fits and is made for the #3 casting size grill. Each individual cook grids measures 8 3/8 by 16 7/8 inches. There are three pieces in the set. (62503)
Set of 3 Porcelain Coated Wire Cook Grids
P/N CG20P
in-stock
Alternative set of porcelain coated wire cook grids - set of 3. Made for exact fit in the #3 size casting. They can be turned over to duplicate the adjustable height levels of the original cast iron grids. $57.00
for 3 Cook Grids
Quantity:
Rock Grate
P/N BG16/Rusty
in-stock
Our warehouse stock of these BG16 rock grates are still in original plastic packaging but due to humidity and storage the grates are slightly rusted. We have reduced the price for them to 12.00 each. Please do not order if you will not be happy. Thank you for your understanding.
Rock grate. Size is 13 1/2 by 23 5/8 inches.
$12.00
Each
Quantity:
77 Ceramic Briquettes
P/N BRICS77
in-stock
These high quality ceramic briquettes are made in the U.S.A. and are the choice of many grill manufacturers. We special offer them as our choice for replacement grill briquettes. 77 Briquettes. Our ceramic briquettes, popular for over fifteen years, are approximately two inches square, flat on the bottom and forming a four-sided pyramid shape on top to absorb and burn up the grease. We have just one shipping charge per order so you can add a bag for no additional shipping charge. $31.50
for 77 briquettes
Quantity:
Warming Rack Alternatives. In different years, Grill Body 3 used two different style warming racks. Read the description below to make the correct choice.
Warming Rack
P/N 743105
Sorry, Broilmaster has discontinued this warming rack and we are sold out. We cannot supply have no substitutes.
This is the warming rack used on older models of the #3 casting body size. The warm rack went across the back of the grill and set in notches in the grill casting. The warm rack did not move as the lid was opened. (5G/)0WH - 1009)
Heat Indicator
P/N HI
Sorry, we do not stock or sell this heat indicator. We have so substitutes.
Rectangular Heat Indicator that Mounted in the front of the top casting with two mounting screws. Heat sensor fits through the small hole in top casting. (TG-2B) [i]
Control Knob
P/N 662327R
in-stock
This valve knob was used on post control models. Grills with dual control valves on the post and took two knobs. Grills with a single valve took one knob. Broilmaster has discontinued this knob and we substitute a replica universal knob that will work in its place. (k10) $4.75
Each
Quantity:
Valves & Orifices
Sorry, we do not sell any valves or orifices for Broilmaster grills. Also, for reasons of product liability and customer safety, we do not sell or offer any orifices or conversion kits to change grills from one gas to another.
Do Not Stock or Sell
Lid & Cart Handles
Sorry, we do not stock or sell any of the replacement plastic, wood, or metal handles for Broilmaster gas grills.
Do Not Stock or Sell
Other Parts
Sorry, we don't sell valves, igniters, cart parts, wheels, pedestal or cart base kits, no top or bottom aluminum castings for Broilmaster grills. We also don't sell grease cup holders, grid lifters, hood lifters, shelves or shelf boards or brackets.
Do Not Stock or Sell
 
Carts, Post and Pedestals, and Inground Posts
We do not stock or sell any posts for rollaround carts, pedestal bases, or inground mountings.
We do not sell any posts for Broilmaster grills.
We do not stock or sell any pedestal bases, carts, wheels, or mounting hardware.
Contact Broilmaster Customer Service for posts you need and any hardware or parts for rollaround carts, pedestal base mountings, or inground mountings.

 

 

 

Thermos Grill Parts for Thermos Grills from Grill Parts Distributors, the Gas Grill Parts Specialist for Gas Grills.
Grill Parts Specialists for Charbroil, Sunbeam, Thermos, Charmglow, Weber, Ducane and Broilmaster Parts.
 

Answers and Click Throughs to Frequently Asked Questions

What We Sell:  We sell the popular replacement parts for the brands of gas grills listed on our website. All the parts we sell are shown or listed on our website. The parts carry a one year warranty.  We have no other parts to add to orders and no other parts available for sale. We offer shopping cart ordering - either by model number, by part number, or by descriptive, illustrated list of parts.  We reserve the right to limit quantities ordered.
How To Order:  All orders are placed through our website: bbqparts.com.  Please use our online brand shopping carts for efficient order processing.  To maintain accounting and shipping accuracy, we do not combine orders or change quantities or change parts ordered after the shopping cart is closed out.  If you need to change or cancel, let us know as soon as possible and we will do out best to catch the order before shipping.
How To Contact Us:  Sorry, we do not offer phone service.  We find we can offer better and more informed customer service by responding to email questions and queries.  Click here to go to our customer inquiry form.  If you need to report damaged or missing parts, please click here for that report form.  Thank you.
How To Pay: Orders can be charged to Visa, MasterCard, or Discover. Sorry, we do not accept American Express, money orders, or checks.  Sorry, we do not accept PayPal.
Where We Ship: We only ship to 48 of the United States, the states sometimes referred to as the "lower 48." All orders are shipped via United Parcel Service ground service.
How We Ship:  There is one low, flat rate shipping charge per order - $8.89 per order.  We only ship to the lower 48 United States and only via UPS ground service.  We need a street address for the shipping address.  No PO Boxes.  Sorry, we are unable to combine orders nor can we add to orders after the shopping cart is charged and closed out.  Sorry, we do not offer customer pick up or returns at our warehouse.  We usually ship within two business days of the receipt of order.
Where We Are:  Our shipping and warehouse location is in St. Petersburg, Fl.  All parts orders are shipped from St. Petersburg, Fl.  We do not have a retail store.   And, sorry, we do not offer customer pick up or returns at our warehouse.
Shipment Inquiry
& Report Form
  Customer
Inquiry Form
  Shipping and
Processing Times
  Returns
Policy
  Privacy
Policy
To Send Order Inquiry, Click Here: Orders@bbqparts.com
 

Back to the Broilmaster Page
Back to the Home Page


Copyright 1997- 2017, BBQPARTS.com. All right reserved. Propane and natural gas are explosive and dangerous. We urge all consumers to be careful when using and repairing their gas grill. Do not use unsafe grills. Grills should be used according to manufacturer's specifications. The owner's manual often provides a good troubleshooting guide. If you have concerns about the repair of your gas grill, we urge you to contact a local gas appliance service company or the local gas company in your area. Also, grill manufacturers have customer service help lines to assist consumers.