| Parts |
Description |
Price |
|
 Dual Stainless H Burner with Twin Straight Venturi Tubes that go down the post of the grill. The burner is approximately 15 1/2 inches wide and the length of the straight venturi tubes is approximately 7 inches.
|
$32.95
Each
|
| Cast Iron Burner |
At various times over the years, cast iron replacement burners have been made for older Charmglow models. The quality of these burners has been inconsistent, from poor to fair. We do not stock or sell cast iron burners for Charmglow grills. We recommend and sell the stainless burner listed above. |
|
|
 Chrome Plated Warming Rack. Size: 4 5/8 by 19 3/4 inches.
|
$7.95
Each
|
|
 Chrome Plated Cooking Grid. Size: 14 1/2 by 18 3/8 inches.
|
$16.50
Each
|
|
 Porcelain Coated Wire Cook Grid. Size is 14 1/2 by 17 1/4 inches with squared off corners. These are made with squared-off corners so the porcelain can adhere to the wire better. They fit the grill front to back with a slight gap on each side.
|
$21.50
Each
|
|
 Solid stainless steel rod cook grid. Sturdy 1/4 inch diameter provides durable cooking surface. Dimensions are 14 1/2 inches front to back and 17 1/4 inches across the front, from left to right. Designed and made to fit the classic Charmglow models AMK and CC1. Upgrade and replacement for chrome cook grid and porcelain cook grid.
|
$27.75
Each
|
|
Steel Rod Rock Grate. Size: 13 3/8 by 17 5/8 inches.
|
$13.95
Each
|
|
 These high quality ceramic briquettes are made in the U.S.A. and are the choice of many grill manufacturers. We special offer them as our choice for replacement grill briquettes. Ceramic briquettes, each approximately 2 inches square, flat on the bottom and forming a four-sided pyramid shape on top to absorb and burn up the grease. By ordering here, you will receive a quantity of 70 individual ceramic briquettes.
|
$27.95
for 70 briquettes
|
| Dual Valve |
Charmglow produced a limited number of grills with "dual" valve and single control knob. The burner had two venturi tubes that went down the post and with the on knob you could turn on one side or the whole burner. Some model numbers were AMK-T or 2200. Unfortunately, we are sold out of this dual valve with the single knob and have no source for more. Cannot supply. |
No longer available. |
|
 Sorry, we can no longer supply the valve mounting block. We are sold out and do not know of any substitutes.
Mounting Block for Propane Valve: This is the cast aluminum block that goes below the propane valve to hold the valve in place on the post. Comes with brass mounting screw. Use pipe dope or Teflon tape to seal it when screwing mounting adapter onto valve.
|
|
|
 We are sold out of this natural gas regulator. We have tried for over a year to replenish our inventory... without success. We cannot supply and do not have an alternative source to suggest. We do not expect this regulator to be available ever again and have no substitutes to suggest to use as replacement.
Natural Gas Regulator: On natural gas models of the CC1, there is a natural gas regulator mounted in the post below the grill. The natural gas regulator has a mounting screw that holds it in place on the post.
|
No Longer Available. |
| Control Knob |
No longer available. No substitutes. |
No longer available. |
|
 Front Wooden Handle Kit. Two holes in front casting of grill to mount wood handle across front. Includes Hardware.
|
$9.50
Each
|
|
 Side Wooden Handle Kit. Side wood handle mounted on side of top casting through single hole. (MCM 25950)
|
$5.95
Each
|
|
Sorry, we are sold of the 24 inch post and it is not available any longer. We have checked with our suppliers and it is a discontinued item. No longer available. If you see it elsewhere still in stock, we suggest you buy it.
24 inch post. 3 inches in diameter. Can be used for either the old Charmglow rollaround cart or the round pedestal base.
|
No Longer Available. |
|
Sorry, we are sold of the short 9 inch post and it is not available any longer. We have checked with our suppliers and it is a discontinued item. No longer available. If you see it elsewhere still in stock, we suggest you buy it.
9 1/2 inch long post. 3 inches in diameter. Used on some cart models. (MCM1300)
|
No Longer Available. |
|
 48 inch in ground post. 3 inches in diameter.
|
$49.00
Each
|
|
 Round aluminum pedestal base for 24 inch post. Pedestal base accepts a 3 inch diameter post.
|
$59.00
Each
|
| Post Collar Kit |
Post Collar Kit. On some Charmglow models, there was a two-piece post collar (like a dog collar) that secured the 3 inch post to the bottom of the grill casting. This has not been available since 1990. We have none in stock and no substitute. Sorry. |
|
|
Owner's Manuals, Instruction Books, and Parts List. The original Charmglow company went out of business approximately 25 years ago. We have no owner's manuals, instruction books, or parts list to provide for these grills. Sorry.
|
|
Other Parts: Sorry, we have no top or bottom lid castings for the Model AMT-T. We have no cart parts, no legs, wheels, wheel axles, wheel hub caps, or control panels for this model.
|
|
Rotisseries, Covers, and Accessories. Sorry, we don't stock, sell or have any rotisserie kits, rotisserie motors, rotisserie parts, covers, shelves or any other accessories for old Charmglow models. And, unfortunately, we have no referral information for these items either.
|
